Multistage Sampling | Introductory Guide & Examples

In multistage sampling, or multistage cluster sampling, you draw a sample from a population using smaller and smaller groups (units) at each stage. It’s often used to collect data from a large, geographically spread group of people in national surveys.

Single-stage vs multistage sampling

In single-stage sampling, you divide a population into units (e.g., households or individuals) and select a sample directly by collecting data from everyone in the selected units.

In multistage sampling, you divide the population into smaller and smaller groupings to create a sample using several steps. You can take advantage of hierarchical groupings (e.g., from state to city to neighborhood) to create a sample that’s less expensive and time-consuming to collect data from.

You can use either probability or non-probability sampling methods in single-stage and multi-stage sampling. But for external validity, or generalizability, it’s best to use probability sampling methods, which allow for stronger statistical inferences.

Single-stage sampling

In single-stage probability sampling, you start with a sampling frame, which is a list of every member in the entire population. It should be as complete as possible, so that your sample accurately reflects your population.

Sampling frame
You’re surveying students in your state in a large-scale study. Your target population is students aged between 13 and 19, and your ideal sample size is 7500 students.

The sampling frame for your study is a list of all teenage students registered at schools within the state. To obtain this list, you can reach out to the state education department or to each school individually to request a list of students.

You can use simple random, systematic, stratified, or cluster sampling methods to select a probability sample from your sampling frame.

Cluster vs stratified sampling

In cluster sampling and stratified sampling, you divide up your population into groups that are mutually exclusive and exhaustive.

In cluster sampling, the population is divided into clusters, which are usually based on geography (e.g., cities or states) or organization (e.g., schools or universities). In single-stage cluster sampling, you randomly select some of the clusters for your sample and collect data from everyone within those clusters in one stage.

Single-stage cluster sampling
You divide the sampling frame up based on geography, and you end up with 98 area-based clusters of students. You select 15 clusters using random selection and include all members from those clusters into your sample.

In stratified sampling, the population is divided into strata, which are often based on demographic characteristics such as race, gender or socioeconomic status. Every unit or member of the population is placed in one stratum. You select some members from each stratum so that all groups are represented in your sample.

Single-stage stratified sampling
You divide the sampling frame up into three strata of different socioeconomic status. You use random selection to choose participants from each stratum separately to ensure that you have enough participants from each socioeconomic level in your sample.

Multistage sampling often involves a combination of cluster and stratified sampling.

Receive feedback on language, structure and formatting

Professional editors proofread and edit your paper by focusing on:

  • Academic style
  • Vague sentences
  • Grammar
  • Style consistency

See an example

Multistage sampling

Multistage sampling is often considered an extended version of cluster sampling.

In multistage sampling, you divide the population into clusters and select some clusters at the first stage. At each subsequent stage, you further divide up those selected clusters into smaller clusters, and repeat the process until you get to the last step. At the last step, you only select some members of each cluster for your sample.

Like in single-stage sampling, you start by defining your target population. But in multistage sampling, you don’t need a sampling frame that lists every member of the population. That’s why this method is useful for collecting data from large, dispersed populations.

Research example
Your population is all students aged 13–19 registered at schools in your state.

If you’re unable to access a complete sampling frame, you can’t use single-stage probability sampling from the whole population. In addition, collecting data from a sample of individuals across the state would be very difficult, costly, and time-intensive.

Instead, you decide to use a multistage sampling method to collect a representative sample of participants.

In multistage sampling, you always go from higher-level to lower-level clusters at each stage. The clusters are often referred to as sampling units.

At the first stage, you divide up the population into clusters and select some of them: these are your primary sampling units (PSUs).

At the second stage, you divide up your PSUs into further clusters, and select some of them as your secondary sampling units (SSUs).

You can end at the second stage, or continue this process with as many stages as you need. In the last stage, you’ll get to your final sample of ultimate sampling units (USUs).

Multistage sampling
In the first stage, you make a list of school districts within the state. You select 15 school districts as your PSUs.

In the second stage, you list all schools within those school districts. You select 10 schools from each district as your SSUs.

In the third stage, you obtain a list of all students within those schools. You select 50 students from every school as your USUs, and collect data from those students.

For a probability sample, you must use a probability sampling technique to select clusters at every stage. But you can mix it up by using simple random, systemic, or stratified methods to select units at each stage based on what’s relevant and applicable to your study.

First stage: Primary sampling units

At the first stage, like in cluster sampling, you’ll divide your population into clusters that are mutually exclusive and exhaustive.

Then, you’ll choose some of your clusters to be your primary sampling units, ideally using a probability sampling method. You can use any of the single-stage sampling methods to select your PSUs.

Large-scale surveys often use a combination of cluster and stratified sampling at the first stage to help ensure that the units are representative of the larger population. This is called a stratified multistage sample.

You begin by stratifying your clusters at the first stage. After stratification, you select clusters using a probability sampling method.

First stage example
At the first stage, you decide to use a combination of cluster and stratified sampling.

You make a list of all school districts within the state. Each school district is a unit, or cluster. You can easily create a list of school districts because it’s publicly available information, unlike a list of your target population of students in the state.

You stratify the school districts by area type: urban, suburban, and rural regions. You want to ensure that all three area types are represented in your sample.

For each stratum, you list the school districts that fall in that category. Then, you use simple random sampling to select 5 school districts from within each stratum. These 15 school districts are your primary sampling units.

Single-stage cluster sampling ends at this point because you would collect data from everyone within your selected clusters (the PSUs). This is often unfeasible in real life, so multistage sampling goes further by sampling from within each cluster or unit to create new units.

Second stage: Secondary sampling units

At the second stage, you divide up your PSUs to get to smaller sampling units. You’ll select only some of these smaller units from within each selected PSU: these are your secondary sampling units (SSUs).

Second stage example
At the second stage, you list all schools within your selected school districts. Collecting data from all schools is a lot of work, so you further sample from this school list to narrow down the number of schools you’ll actually visit.

You use a simple random sampling method to select 10 schools from each school district. These are your secondary sampling units.

If you end your sampling at this point, it’s called two-stage or double-stage sampling. This would mean collecting data from everyone in your secondary sampling units: all students in the selected schools.

It’s optional to continue the process further by adding more stages, but it can often make the research process simpler.

Final stage: Ultimate sampling units

You can keep repeating the process of dividing up each sampling unit further and selecting a few of them for the next stage. At the final stage, you end with your ultimate sampling units.

Final stage example
At the final stage, you contact the selected schools to obtain lists of registered students. From each list, you use systematic sampling to select 50 students from each school.

These students are your ultimate sampling units—they form final sample that you will collect data from.

Advantages and disadvantages

Multistage sampling is effective and flexible with large samples, but it may be difficult to ensure your sample is representative of the population.

Advantages

  • You don’t need to start with a sampling frame of your target population.
  • Compared to a simple random sample, it’s relatively inexpensive and effective when you have a large or geographically dispersed population.
  • It’s flexible—you can vary sampling methods between stages based on what’s appropriate or feasible.

Disadvantages

  • Compared to simple random samples, you’ll need a larger sample size for a multistage sample to achieve the same statistical inference properties.
  • The best choice of sampling method at each stage is very subjective, so you’ll need clear reasoning for your decision.
  • It can lead to unrepresentative samples because large sections of populations may not be selected for sampling.

Frequently asked questions about multistage sampling

What is probability sampling?

Probability sampling means that every member of the target population has a known chance of being included in the sample.

Probability sampling methods include simple random sampling, systematic sampling, stratified sampling, and cluster sampling.

What is multistage sampling?

In multistage sampling, or multistage cluster sampling, you draw a sample from a population using smaller and smaller groups at each stage.

This method is often used to collect data from a large, geographically spread group of people in national surveys, for example. You take advantage of hierarchical groupings (e.g., from state to city to neighborhood) to create a sample that’s less expensive and time-consuming to collect data from.

Is multistage sampling a probability sampling method?

In multistage sampling, you can use probability or non-probability sampling methods.

For a probability sample, you have to conduct probability sampling at every stage.

You can mix it up by using simple random sampling, systematic sampling, or stratified sampling to select units at different stages, depending on what is applicable and relevant to your study.

What are the pros and cons of multistage sampling?

Multistage sampling can simplify data collection when you have large, geographically spread samples, and you can obtain a probability sample without a complete sampling frame.

But multistage sampling may not lead to a representative sample, and larger samples are needed for multistage samples to achieve the statistical properties of simple random samples.

Sources in this article

We strongly encourage students to use sources in their work. You can cite our article (APA Style) or take a deep dive into the articles below.

This Scribbr article

Bhandari, P. (October 10, 2022). Multistage Sampling | Introductory Guide & Examples. Scribbr. Retrieved October 19, 2022, from https://www.scribbr.com/methodology/multistage-sampling/

Is this article helpful?
Pritha Bhandari

Pritha has an academic background in English, psychology and cognitive neuroscience. As an interdisciplinary researcher, she enjoys writing articles explaining tricky research concepts for students and academics.